Have you experienced peeling or raised bubbles with Executive Cookware?

[pamperedlinda]

Do any of you who own the Executive Cookware have problems with it peeling? Or have raised bubbles in the finish? I have a very good customer and friend who this has happened to on 3 different pieces and two of them twice! She ordered the 12 piece set from me last year and when it was delivered the 4 qt & 8 qt pots had raised bubbles in the non-stick coating (when she scratched them with her fingernail the finish came completely off ....I had them replaced and then.....the replacement pots also had the raised spots....so I had them replaced again, these are fine. Well, she just ordered the new 12qt pot and guess what!?!? This one has raised spots in the non-stick too! She is the only customer who has had this problem that I am aware of. If she wasn't such a good friend (and completely normal person) I would probably question her. We live too far apart for me to pop over and see the cookware for myself. She sent me a photo (from the 4 & 8 qt), you can't really see it too well but there is definately spots on them. When I called HO about this I asked if there was a bad batch of cookware or if this was a problem that they were aware of- they said no. I just think it's very strange that this keeps happening to my friend. Have any of you had this happen to you or your customers? I'm baffled with it.

 

[chefkristin]

Well that stinks doesn't it. Thankfully it has not happened to me.

 

[gilliandanielle]

OMG! I have never heard of that!! I have had mine since they came out (one or two springs ago) and haven't had any problems. My DH has even cut on my cookware with knives and it doesn't peel or bubble where the cuts are...

 

[Ginger428]

Sorry. I have not had any problems either....

 

[dannyzmom]

This is the first I have ever heard of it...

 

[pamperedlinda]

Thanks girlies. It has me absolutley baffled. I don't know if she's just got bad luck or what. She's a good friend with a good head on her shoulders so I know she's not making this up. I just think it's so strange that this keeps happening to her. She's also in direct sales (Creative Memories) so thankfully she's very understanding with HO and our return policies!

 

[jenniferknapp]

Thanks girlies. It has me absolutley baffled. I don't know if she's just got bad luck or what. She's a good friend with a good head on her shoulders so I know she's not making this up. I just think it's so strange that this keeps happening to her. She's also in direct sales (Creative Memories) so thankfully she's very understanding with HO and our return policies!

Even if she is making this up, how would she possibly create this peeling if HO requires the original be sent?

 

[KellyTheChef]

My cousin (another VERY normal person) has had this happen more than once, too!

 

[pamperedlinda]

My cousin (another VERY normal person) has had this happen more than once, too!

Sorry this has happened to you too. My director thought maybe there was a bad lot or something (seems like HO would have admitted to it though if this were the case). I hate it when something like this happens on our most expensive items (and especially the non-stick which people are already opinionated about).

 

[ivykeep]

I wonder if there is something about their shipping -- maybe xrayed through a hub or something?

Changing from UPS to FEDEX may make a difference??

Other than that I have no idea!

 

[BethCooks4U]

I have a customer that this happened to - twice. I had to replace one of my Professional pans. DH uses it all the time. All other pans are fine. The only thing we can think is that he rinses it off (well not any more!) before it is cooled. I am going to ask my customer if she does that too.

 

[pamperedlinda]

.............The only thing we can think is that he rinses it off (well not any more!) before it is cooled. I am going to ask my customer if she does that too.

That could make sense, but in my customer's case they were like that right out of the box. She let a friend of hers have one of her half-price items last month (this girl does a show for me several times a year....good ones too ) so her friend could get the cookware. My friend checked-over every piece before she gave it to her and it was fine. It has me on edge a little now -so everytime I pull out a piece of my cookware I think of her and start checking for peelings! What's strange though is that every piece that she has had a problem with are the pieces with 2 handles....don't know if that has anything to do with it, but I thought it was a starting place. What pieces have you all had problems with?

 

[pamperedlinda]

I wonder if there is something about their shipping -- maybe xrayed through a hub or something?

Changing from UPS to FEDEX may make a difference??

Other than that I have no idea!

Don't think so. Her first damaged pieces were when we still had UPS, this last one was with Fed Ex.

 

[KellyTheChef]

The bubbles and peeling are from a manufacturing defect. Somehow the coating is not sticking to the pan like it is supposed to. When my cousin got hers, she said there were little bubbles on there, and when she scratched them with her nail, the finish came right off. I don't think it is anything that a customer can CAUSE to happen through use. Sounds like there was a bad batch or more... I don't like it either, since I always talk about how our non-stick coating is BAKED on, not SPRAYED on, so it WON'T flake off! Thank goodness this doesn't happen a lot!

 

[klsnyder]

The only thing we can think is that he rinses it off (well not any more!) before it is cooled. I am going to ask my customer if she does that too.

Call me stupid, but can you not rinse them off before they are cooled?

 

[KellyTheChef]

Call me stupid, but can you not rinse them off before they are cooled?

I just double checked the PIG and it doesn't say anything about that. Many times, I will set my hot pan in the sink and run water into it to soak during dinner. I don't see any reason that you can't rinse them while hot. I think we were all just trying to figure out why this lady was having problems with hers, but I really think it was a manufacturing defect, not anything that she did to the pans!

 

[KellyTheChef]

Ohh! Ohh! Ohh!! I just got my star!!!!!!!

(I know...not big in the grand scheme of life, but big on CS!!)

 

[mommyhugz1978]

I havent' noticed any bubbles or anything but I think I will check mine!

 

[OhmyDLM]

I have also had this happen to two different customers if it makes you feel any better. One was an Executive frying pan and the other was the Executive Double Burner Griddle. Other than that, no real problems. I have all 3 sets of cookware (Generation II, Professional, and Executive) and nothing has happened to any of mine yet... Yay for that!

 

[gilliandanielle]

I just double checked the PIG and it doesn't say anything about that. Many times, I will set my hot pan in the sink and run water into it to soak during dinner. I don't see any reason that you can't rinse them while hot. I think we were all just trying to figure out why this lady was having problems with hers, but I really think it was a manufacturing defect, not anything that she did to the pans!

I know you are "supposed" to cool any metal pan before washing it but I am not sure why. I serve dinner out of the pan, eat, and then wash it after we eat. That way it has cooled enough to not harm the pan...

 

[srduggan]

I've had my pans for about 2 years and they peel. I've been frustrated but they were a gift and I didn't know about the life time warranty. I thought I was going to have to deal with it. I've only been a consultant for a couple weeks now so I'm going to contact HO about mine.

 

[tiffanypc05]

I've got to send my 12 inch skillet and my bigger pot that came with the 5 pc set back and two lids. I've been to lazy to send these back but i've got to make a point to do it. Both pots had bubbles on the inside and out and in the pot, it has started to like rust where the bubble used to be. Two of my lids come in with some rust on them also and one of the lids on my moms pots did the same thing. Glad i'm not the only one.

 

[speedychef]

I got my sis the 12 piece set for her wedding, and one of the pans had a little bubble on it...they replaced it and no problem now!

 

[micocina]

I had started a thread a few weeks ago questioning the Mix n Chop. The blades seemed a bit too sharp to use on our cookware, but everyone that had replied said that they weren't experiencing any problems. I am still afraid to use it because I had to return my executive double burner griddle a couple of months ago. I had been using it for a few months when I noticed a small speck of the the coating had fallen off. When I called HO, they questioned me about what tools I was using on it, but I told them that I only use ours on all of my cookware. They went ahead and sent me a label to have it returned and of course I paid $10 for the shipping, but I did get a new one. Hopefully, it was just a bad batch. I wouldn't know what face to put if I kept getting complaints on it.

 

[PamperedChefDebi]

My 12" Family Skillet has a couple "mars" in the finish but I thought maybe my husband or kids did it but I never noticed when it happened. There is one small spot right in the middle and two spots that look like lines in the finish but not all the way through. If that made sense.

 

[tiffanypc05]

For everyone who has had it replaced, did you have to pay to ship the whole item back? One of the reasons I've been procrastinating is because I'm worried about the shipping costs and not having my pots to cook in while i'm waiting for the others to come back.

 

[RachelNguyen]

I had two pieces of my 1 year old executive cookware end up with little spots on the surface where the non-stick had flaked off. I mailed them back. And yes, I did have to pay for shipping, which stinks.

Now I have received the new ones, but they made a mistake and sent the wrong pieces, so those have to get mailed back too. Jeesh.

I am not happy with this, I can tell you. I have been selling cookware like crazy and am very uncomfortable with the idea of having to deal with a bunch of irate customers. Especially when they discover they have to pay for shipping for something that is NOT their fault.

 

[ivykeep]

Now I have received the new ones, but they made a mistake and sent the wrong pieces, so those have to get mailed back too. Jeesh.

I am not happy with this, I can tell you. I have been selling cookware like crazy and am very uncomfortable with the idea of having to deal with a bunch of irate customers. Especially when they discover they have to pay for shipping for something that is NOT their fault.

You don't have to pay for shipping if the return is within the first 30 days that you bought it (or had it replaced). They will send you a return label. If you wait beyond 30 days of the order/adjustment date, you will have to pay shipping.

 

[ivykeep]

When I called HO, they questioned me about what tools I was using on it, but I told them that I only use ours on all of my cookware.

I would expect that they questioned you simple for information gathering purposes... with a LIFETIME warranty, it doesn't matter what you did to "break" it, they will still replace it (they replace the broken stones caused by user error all the time -- dropping, shock, etc.) But since there seem to be reports of some problems with some of the cookware, they are probably trying to determine if there is a manufacturing defect and if they can get some reimbursement from the manufacturer (or if they need to switch suppliers).

 

[clshirk]

Another question about the cookware- how are the handles?

I'm doing a show in June for a girl who used to sell 10-11 years ago and she recalls the cookware had horrible handles that you couldn't tighten and were just not good. Does anyone know if there are any issues where the handle meets the pan/pot? I told her I really knew nothing bad about them- but reading this thread gives me a little info on how they are made and how they shouldn't have bubbles.