Are Your Forged Cutlery Knives Showing Nicks? | Expert Insight

  • Thread starter Thread starter sl_ostertag
  • Start date Start date
Click For Summary
SUMMARY

The forum discussion centers on the issue of nicks appearing on Forged Cutlery knives, particularly Chef and Utility knives. Users report that these nicks may result from improper honing techniques or exposure to dishwashers, which can cause wear and tear. It is established that honing should be done gently to avoid damaging the blade, and that regular professional sharpening is recommended every one to two years to maintain optimal performance. Additionally, users suggest that local high-end grocery stores may offer free sharpening services.

PREREQUISITES
  • Understanding of knife maintenance and care
  • Familiarity with honing and sharpening techniques
  • Knowledge of the differences between various honing tools
  • Awareness of the impact of dishwasher use on knife longevity
NEXT STEPS
  • Research proper honing techniques for kitchen knives
  • Learn about the differences between various knife sharpening tools
  • Investigate local services offering professional knife sharpening
  • Explore the effects of dishwasher use on knife materials and longevity
USEFUL FOR

Home cooks, professional chefs, and kitchen enthusiasts looking to maintain the quality and longevity of their Forged Cutlery knives.

S
sl_ostertag
Has anyone noticed little nicks in your Forged Cutlery? A customer of mine brought it to my attention that he noticed little nick's in his knife blade (Chef Knife) and then I looked at mine and found the same nick's in my Utility knife! Any of you noticed the same??
 
Two things:

are they going into the dishwasher, or into a sink of dishes to clang up against something?

are you regularly honing them?
 
  • Thread starter
  • #3
No dishwasher cleaning and yes honing them. I didn't notice any of the similar nick's on my other knives.
 
Hmmm, not sure what to tell you! I just looked VERY closely at my chef's knife and Santoku knife...there are tiny nicks in them...perhaps that just happens with use? I know mine are probably close to needing to be professionally sharpened.
 
  • Thread starter
  • #5
That's what I am thinking too! My friend that is VERY careful with his knives (including PC and other quality ones) says the same. He thinks it is just the wear and tear of it. He explained that when we honed them we are exposing the softest part of the blades and that it is very likely that there could be little nick's in them.
 
The nicks mean it's time to sharpen them. If you use them often, sharpening will need to be done more often (but usually just once per year). Honing keeps the edge from folding over, sharpening evens out the nicks that occur during normal use. HTH!
 
I have had the same trouble with my forged cutlery. Mine also gets small rust looking spots on the blade. I think I figured out the reason for the rust spots - putting the clean knife into the case it there is any water on it. Baking soda works wonders on that. Bonita
 
  • Thread starter
  • #8
Makes sense! Thanks!!!
 
I don't know. The first time I honed my Chef's knife it ripped up the blade. I had huge chunks missing. It look so bad I cannot take it to show. I had only used it once or twice before I honed it the first time.
 
For those of you needing sharpening I just learned that Byerly's and Lunds here in the twin cities offer free sharpening. 2 at a time and you leave them 24 or 48 hours or something then come pick them up. If you are in need of sharpening I would suggest checking out your local high-end grocery store - maybe they offer the same?
 
Yep, nicks mean it's time to sharpen. I had the same problem with the honer. I think I'm going to send it back. It has destroyed every knife I've put through it.
 
janezapchef said:
Yep, nicks mean it's time to sharpen. I had the same problem with the honer. I think I'm going to send it back. It has destroyed every knife I've put through it.
Click to expand...

Don't put too much pressure on the knife as you hone it. It should make a faint 'ringing' sound as you run it through the honer and you really shouldn't use any more pressure than what the weigh of the blade exerts.

Light touch people, use a light touch!
 
janezapchef said:
Yep, nicks mean it's time to sharpen. I had the same problem with the honer. I think I'm going to send it back. It has destroyed every knife I've put through it.
Click to expand...

the Honing Tool is only for PC knives. Have you been using other knives in it?
 
DebinIA said:
Don't put too much pressure on the knife as you hone it. It should make a faint 'ringing' sound as you run it through the honer and you really shouldn't use any more pressure than what the weigh of the blade exerts.

Light touch people, use a light touch!
Click to expand...

Thank you...I never heard this before, but it makes sense!
 
Yes, thanks for the honing tip. No, I have never used any other knives in my honer.
 
I have the same problem with my knives. My chefs and uitility have gashes out of them. Mu knives are only 5 months old, so they shouldn't need to be sharpened yet. I hone them and I do it gently. So for me, I am unsure why I have these gashes. But I also don't feel like spending the money to send the knife back.
 
Thanks for the tip on the "ringing sound" you should hear when you hone, and, no, I've never put any knives other than PC in it. I've only put about 2 knives through at all because of the gashes taken out. I'll try another one today and see what happens.
Thanks,
Jane :)
 
Make sure your knife is clean before you hone it. If it's not, you can trap particles in the honing tool that will then mess up the blade.
 
Mine have been clean. I'm sending my honer back for sure!
 
No ... but is it my imagination, or does the blade look "warped" since I got my honing tool?
 
One more question on this... Will getting the knives sharpened "fix" the nicks taken out by the honer? Or, will I now need to send all my knives back too that were ruined by the thing?
 
The honer should not take out nicks. I would send them back. If you haven't had them a year. Professionally sharpen no more than once every one to two years to maintain sharpness.
 
Last edited:
Okay, so what's going on? I'm just reading this thread now. Is something wrong with using the honer?!
 
I just got the PC honer today so i have not use that honer. But i have used other honers and they work fine (the kind that a like ours with the 2 ceramic bars.) Also someone said the the PC honer is only for PC knives. How is that, it's 2 ceramic bars just like any other honer. I grew up around knives had* (fix it from have) an Uncle that sharpened and fix them."Resistance during use indicates knife edge is dull and needs care. Hone routinely to keep the cutting edge in proper alignment for optimal performance. When honing alone is no longer sufficient, professionally sharpen no more than once every one to two years to maintain sharpness." Thats right from the use and care.
 
SassyCook said:
I just got the PC honer today so i have not use that honer. But i have used other honers and they work fine (the kind that a like ours with the 2 ceramic bars.) Also someone said the the PC honer is only for PC knives. How is that, it's 2 ceramic bars just like any other honer. I grew up around knives had* (fix it from have) an Uncle that sharpened and fix them.

"Resistance during use indicates knife edge is dull and needs care. Hone routinely to keep the cutting edge in proper alignment for optimal performance. When honing alone is no longer sufficient, professionally sharpen no more than once every one to two years to maintain sharpness." Thats right from the use and care.
Click to expand...

Because the bars are set at the exact angle of the blade. Not all knife manufacturers use the same angle.
 
SassyCook said:
The honer should not take out nicks. I would send them back. If you haven't had them a year. Professionally sharpen no more than once every one to two years to maintain sharpness.
Click to expand...

Even if I have had them a year, these are lifetime guarantee knives, and the honer has a 5 year guarantee. I haven't had them sharpened professionally yet, but I know the majority of the nicks came after I used the honer. I know because I actually paid attention to the knife edge after my first honer took giant chunks out of the first knife I used. At any rate, I'll be calling HO tomorrow about all this, so, I'll let you know what I find out.
 
DebbieJ said:
Because the bars are set at the exact angle of the blade. Not all knife manufacturers use the same angle.
Click to expand...
That's True.
 

Frequently Asked Questions

What causes nicks in Forged Cutlery knives?

Nicks in Forged Cutlery knives can be caused by improper use, such as cutting on hard surfaces like glass or stone, or by using the knives for tasks they aren't designed for, like prying or opening cans. Additionally, improper cleaning or storage can lead to damage over time.

How can I prevent nicks in my Forged Cutlery knives?

To prevent nicks, always use a cutting board made of wood or plastic, and avoid cutting on hard surfaces. Ensure that you use the knives for their intended purposes and store them properly in a knife block or magnetic strip to avoid contact with other utensils.

Can I sharpen my Forged Cutlery knives if they have nicks?

Yes, you can sharpen your Forged Cutlery knives if they have nicks. However, it's recommended to use a professional sharpening service or a high-quality sharpening tool to ensure that the blade is restored correctly without further damaging it.

What should I do if my Forged Cutlery knives are showing nicks?

If your knives are showing nicks, assess the severity of the damage. For minor nicks, you may be able to sharpen them at home. For more significant damage, consider taking them to a professional knife sharpener or contacting Pampered Chef for guidance on repair options.

Are nicks in my Forged Cutlery knives covered under warranty?

Generally, nicks caused by misuse or improper care are not covered under warranty. However, if you believe the nicks are due to a manufacturing defect, you should contact Pampered Chef customer service for assistance and to discuss warranty options.

You must log in or register to reply here.

Similar Pampered Chef Threads

Forged Knives With Nicks in Them?
  • salthechef
    • Products and Tips
2
Replies
32
Views
4K
lauraP2000
Forged Cutlery- Rusting Not Covered Under Warranty?
  • kdangel518
    • Products and Tips
Replies
27
Views
12K
ShelbyMichalek
How do you properly use a Forged Cutlery Honing Tool for kitchen knives?
  • sjspchef
    • Products and Tips
Replies
2
Views
2K
Admin Greg
Are you using the right knives in your kitchen?
  • DebPC
    • Products and Tips
Replies
9
Views
2K
Admin Greg
Restore Your Forged Cutlery with Stainless Cleaner!
  • kathijenkins
    • Products and Tips
Replies
15
Views
5K
elizabethfox
Pampered Chef Knives Rated by Consumer Reports
  • KimoMakano
    • Products and Tips
Replies
10
Views
2K
ParishKitchen
Why Are Sharp Knives Safer Than a Dull Knife? Answer Revealed.
  • esavvymom
    • Products and Tips
Replies
4
Views
4K
quiverfull7
How Dangerous Are Forged Knives in the Kitchen?
  • jrstephens
    • Products and Tips
Replies
25
Views
3K
rebeccastt
Essential Kitchen Kit for the Traveling Foodie Chef: A Budget-Friendly Guide
  • lt1jane
    • Products and Tips
Replies
6
Views
3K
lt1jane
Surviving a Kitchen Mishap: My Experience with the Forged Cutlery Club
  • dianevill
    • Products and Tips
2
Replies
45
Views
4K
dianevill
Back
Top